An important part of the molding machine

1. The inlet frame and width limiter of the setting machine can help the cloth guide to expand and correct the cloth, and can select the high and low position into the cloth
2. Compound center corrector (cloth guide) has the function of cloth guide and straight line correction.

3, sizing machine (rolling car) water pressure and sizing application machinery: a component of the molding machine

4, speed compensation device (displacement detection wheel), can control the tension between sizing machine and setting machine

5, the line gauze correction product, can correct the cloth area of the line yarn or line arc

6. Central control panel Shenxin Machinery: part of the molding machine, all the electric adjustment functions are concentrated above the entrance box, covering 95% of the operation function of the whole machine.
7. Edge spreader and edge tracker are responsible for the edge unfolding and tracking function before the needle.
8. Feeding device for needle on inlet box and shrinkage code

9, needle/clip chain and track, needle board or splint conveyor cloth area into the oven drying

10. Hot air circulation bellows Shenxin machinery: part of the molding machine, equipped with hot air circulation windmill, heat exchanger, drying or shaping cloth area

11, width adjustment machine, can adjust the cloth

12. Exhaust system

13, cloth out of the device of the control/roll cloth: molding machine component