Shoemaking machinery is divided into: The punching part is a punching head that can move around along the beam. The knife is fixed on the punching head and can also be placed on the processed object. Large, computer controlled gantry shoe machine punch is installed on the tool can rotate mold frame, can be used according to the sequence of…
General steps for debugging First of all, according to the shape of the shoe last with good claw and claw and two claw and sweep knife and bundle, and then adjust the claw to the outer support table 10 mm, claw and inner support table, sweep knife ao into a straight line. The claw disc to the middle position, take…
Step on the quick retreat pedal. 6 If improper operation or equipment abnormality occurs during operation. Return the device to its original state. Often because of a little deviation, cause a great impact. Therefore, I will pay attention to the details before the test. The specific steps for adjusting the machine before the test include: Before the machine adjustment. 1…